Technical Specification: A union is the combination of a Male, Liner, and Food Grade Rubber Gasket coupled by a nut.
Material Construction: AISI 304, AISI 316 or AISI 316L.
Sizes: From 1" (25.4 mm), 1 ½" (38.1 mm),2" (50.8 mm),2 ½" (63.5 mm),3" (76.2 mm) and 4" (101.6 mm).
Standards: Confirming to SMS/DIN/IDF (Expandable or Weldable)
Quality Tests: Complete Metallurgical & Pressure tests.

Technical Specification:These are available in Short/Long having radius from 1.25D to 1.5D confirming to 90° Right Angle, which can be generally coupled to the pipe line with (Expandable/Weldable) unions.
Material Construction: AISI 304, AISI 316 or AISI 316L
Sizes: From 1” to and 4” (25 mm to 100 mm).
Standards: Inch Gauge Pipe (ASTM 270) & NB pipes are as per BS1387:1967
Quality Tests: Complete Metallurgical & Pressure tests.

Technical Specification:These are available in Short/Long having radius from 1.25D to 1.5D confirming to 90° Right Angle, which can be generally coupled to the pipe line with (Expandable/Weldable) unions.
Material Construction: AISI 304, AISI 316 or AISI 316L
Sizes: From 1” to and 4” (25 mm to 100 mm).
Standards: Inch Gauge Pipe (ASTM 270) & NB pipes are as per BS1387:1967
Quality Tests: Complete Metallurgical & Pressure tests.

Technical Specification: The reducers are generally used to reduce or increase the process pipelines higher to lower size pipe lines. These can be directly welded to the pipes or can be coupled with union. There are three types of reducers.

• SMS reducing Males & Liners: Coupled with unions.
• Concentric Reducer & Eccentric Reducers: Welded in the process line.

Material Construction: AISI 304, AISI 316 & AISI 316L.
Sizes: From 1 ½” to 4” (38.1 mm to 101.6 mm).
Standards: Confirming to SMS
Quality Tests: Complete Metallurgical & Pressure tests

Technical Specification:
(a) Triclover Clamp with Ferrules: A Triclover clamp with Ferrule is the combination of Ferrules (Connected to the end of the pipe by welding) and food grade Rubber Gasket coupled by a Clamp. These are used to clamp pipe end connections with and to give strong support to pipes.

(b) Clamp with Nipple: A clamp with Nipple is the combination of ½” B.S.P Nut welded to the clamp along with ½” threaded nipple. This Nipple is used to connect additional pipe to give strong support to the horizontal process pipe line.

(b) Clamp with Nipple: A clamp with Strap is used to give strong support to the horizontal process pipe.

Material Construction: AISI 304, AISI 316 & AISI 316L.
Sizes: From 1” to 4” (25.4 mm to 100 mm),
Quality Tests: Complete Metallurgical & Pressure tests.

Technical Specification: More Wall thickness pipes are machined as steps on the half portion and are generally coupled with union in the line. The step portion will hold the flexible tube.
Material Construction: AISI 304, AISI 316 & AISI 316L
Sizes: From 1” to 4” (25.4 mm to 101.6 mm)
Standards: Confirming to SMS and also available with unions.
Quality Tests: Complete Metallurgical & Pressure tests.