| |
|
Sri
Pumps & Fittings is a leading manufacturers of Dairy
Valves, ranging from 25 mm to 100 mm with different
End connections, conforming to DIN, IDF & SMS Standards
for different applications. The construction features
and the choice of materials make them especially suitable
for use in Food Processing Industries, Beverage Industries,
Pharmaceutical and Cosmetic Industries.
The Valves manufacturing range includes 2 – 3 Way
Plug Valves, Butterfly Valves, Flow Regulating Valves,
Non-return Valves, Micro Valves, Angular Valves, Fine
Adjustment Valves, Needle Valves, Control Valves, Ball
Valves, Gate & Globe Valves with Material Construction
: AISI 304, 316 & 316L
|
|
Technical
Specification: Plug valve is a quarter turn manual valve
that uses a tapered plug to permit or prevent straight
-through flow through the body. The plug has a straight
through opening. This opening is the same as the area
of the inlet and outlet ports of the valve.
Material Construction: AISI 304, AISI 316 & AISI
316L.
Available Sizes: From 1" to 4" (25mm to 100
mm) in 2 ways or 3 ways |
 |
Standards: Unions:
End Connections with SMS/IDF & DIN (Expandable &
Weldable); Flanges: As per BS 10 Table "F" and
also available as per Customer's Specifications.
Quality Tests: Metallurgical tests & Pressure Tests.
|
|
Technical
Specification: The Butterfly valve is a quarter turn
valve having (0° to 90°) rotary motion that
uses a round disk as the closure element. When in the
full opening position, the disk is parallel to the piping
and extends into the pipe itself.
Sizes: From 1” to 4” (25mm to 100 mm)
Standards: Unions:
End Connections with SMS/IDF & DIN Flanges: As per
BS 10 Table “F” and also available as per
Customer's Specifications.
Quality Tests: Metallurgical tests & Pressure Tests. |
 |
| |
|
|
Technical Specification:
Check valves (also known as Non return Valves)
are Automatic valves that prevent a return or
reverse flow of the process. Check valves are
used for two main purposes: First, to prevent
back flow, and second, to maintain pressure.
Material Construction: AISI 304, AISI 316 &
AISI 316L.
Sizes: From 1" to 4"
(25mm to 100 mm) |
 |
Standards: Unions End Connections
with SMS/IDF & DIN..
Quality Tests: tests &
Pressure Tests.
|
Technical Specification: These valves are Manual
Operated valves to regulate the flow from full
open to fully closed. These are designed specifically
to control the process accurately.
Material Construction:AISI 304, AISI 316 &
AISI 316L.
Sizes: From 1" to 4" (25mm to 100 mm)
Standards: Unions: End connections with SMS/IDF
& DIN. |
 |
Quality Tests: Metallurgical tests
& Pressure Tests.
|
Technical Specification:
These valves are Manual Operated valves to regulate
the flow anywhere from full open to fully closed.
These are designed specifically to accurately
control the process. Improved sealing devices
and highly accurate machining of the stem have
provided tight shutoff as well as characterizable
control. The design of the regulating element,
which allows the stem to turn into the flow without
any significant side loads.
|
 |
The rotary action of the stem
provides a shearing action against the seal, which allows
for clean separation of the process during closure.
Tight shutoff is a characteristic of control valves,
since the stem remains in continual contact with its
seal. A Micro valve is designed to take a pressure drop
in order to reduce line pressure and flow. The interior
passageways of a regulating valve are designed to handle
pressure differential.
Material Construction: AISI 304, AISI 316 & AISI
316L.
Sizes: From 1" to 4" (25mm to 100 mm)
Standards: Unions: End connections with SMS/IDF &
DIN.
Quality Tests: Metallurgical tests & Pressure Tests.
 |
|
Technical Specification:
These valves are Manual Operated valves to regulate
the flow anywhere from full open to fully closed.
These are designed specifically to accurately
control the process. Improved sealing devices
and highly accurate machining of the screw rod
(stem) have provided tight shutoff as well as
characterizable control. The design of the regulating
element, which allows the stem holder to turn
into the flow without any significant side loads.The
linear action of the screw rod provides tight
fit against the seal, which allows for clean separation
of the process during closure. Tight shutoff is
a characteristic of angular valves.
Material Construction: AISI 304, AISI 316 &
AISI 316L.
Sizes: From 1" to 4" (25mm to 100 mm)
Standards: Unions: End Connections with SMS/IDF
& DIN or Flange welded.
Quality Tests: Metallurgical tests & Pressure
Tests.
|
 |
 |
|
Technical Specification:
Pressure relief valve is a self operating valve
that is installed in a process system to act against
over pressurization of the system. When excess
line pressure is detected, the pressure relief
valve automatically opens and the excess pressure
relieved. A pressure relief valve is installed
in a process system where an abnormal operating
condition could damage the process. It depressurize
the process line to safe or normal limits, the
pressure relief valve automatically closes again
to allow for normal system operation. These valves
can be used for both gas & liquid services.
Material Construction: AISI 304, AISI 316 &
AISI 316L.
Sizes: From 1" to 4" (25mm to 100 mm)
Standards: Unions: End Connections with SMS/IDF
& DIN.
Quality Tests: Metallurgical tests & Pressure
Tests. |
|
|
|
|
|
